Difference between revisions of "Newbie Guide: Getting Started on Windows"

From Dreamwidth Notes
Jump to: navigation, search
(moving this section to how-to article)
m (Updating SSH hostname for Dreamhacks.)
 
(17 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
{{Note|text=Feel free to correct, expand, do anything which could make this better and clearer. ^_^}}
 
{{Note|text=Feel free to correct, expand, do anything which could make this better and clearer. ^_^}}
  
{{Note|text=If you have a different OS you may find this still helpful. Just skip the parts which aren't relevant.}}
+
{{Note|text=If you have a different OS you may still find this helpful. While you may not need to install and set up any software the rest is pretty much universal.}}
  
 
= Contributor Licensing Agreement =
 
= Contributor Licensing Agreement =
  
The very first thing you need to do is [[Contributor_Licensing_Agreement|read and sign your CLA]] and mail it to Denise. If you don't agree with its terms Dreamwidth won't be able to accept your code; if you've submitted code but Denise doesn't have your CLA your code can't be added. So read it, think it over, sign it, mail it then wait until you're told it's been received. Now you can get started.
+
The very first thing you need to do is [[Contributor_Licensing_Agreement|read and sign a Contributor Licensing Agreement]] and mail it to Denise. If you don't agree with its terms Dreamwidth won't be able to accept your code; if you've submitted code but Denise doesn't have your CLA your code can't be used. So read it, think it over, sign it, mail it then wait until you're told it's been received. Now you can get started.
  
  
Line 14: Line 14:
 
So what do you need?
 
So what do you need?
  
# You need a github.com account to be able to fetch the Dreamwith code, copy it, and publish your patches so they can be integrated to the main code. This is both where all the Dreamwidth code comes from and where your own code will end up but it's only a gateway. You won't do much on the site itself.
+
# You need a github.com account to be able to fetch and copy the Dreamwith code, find issues to work on, and publish your code so it can be integrated to Dreamwidth. This is both where all the Dreamwidth code comes from and where your own code will end up but you won't do much work on the site itself.
# You need a Dreamhack to see what your changes will do on the site for real. Think of a Dreamhack as an online mirror of the Dreamwidth site which you can modify.
+
# You need a Dreamhack to see what your changes will do on the site for real. Think of a Dreamhack as an online mirror of the Dreamwidth site which you can do whatever you want with.
 
# You need PuTTY to connect github.com to your Dreamhack, to connect your Dreamhack to github.com, and manage your work. Think of PuTTY as your command center.
 
# You need PuTTY to connect github.com to your Dreamhack, to connect your Dreamhack to github.com, and manage your work. Think of PuTTY as your command center.
 
# You need WinSCP to visualize your Dreamhack files and be able to open them in a text editor. Think of WinSCP as a Dreamhack Explorer.
 
# You need WinSCP to visualize your Dreamhack files and be able to open them in a text editor. Think of WinSCP as a Dreamhack Explorer.
 
# You need a text editor to edit your files.
 
# You need a text editor to edit your files.
# You need a Bugzilla account to find and file bugs.
 
 
Each section mentions where you need to do things so you won't get lost.
 
  
 
== Create an account on GitHub ==
 
== Create an account on GitHub ==
  
Go to [http://www.github.com/ GitHub], click on 'sign up and pricing' and create a free account. I suggest you pick a username people are familiar with. It is also best if your github username and your Bugzilla name match.
+
Go to [https://github.com/ GitHub] and create your account.
  
  
Line 32: Line 29:
 
You need to fork the Dreamwidth code onto your own account. Forking is like cloning and branching. It will copy the code and also label your copy as being a branch (a fork) of the original Dreamwidth code so that everybody knows the two are connected.
 
You need to fork the Dreamwidth code onto your own account. Forking is like cloning and branching. It will copy the code and also label your copy as being a branch (a fork) of the original Dreamwidth code so that everybody knows the two are connected.
  
Dreamwidth is divided into two parts: an open-source part called 'dw-free', and a private part called 'dw-nonfree'. The private part is composed of elements which are specific to dreamwidth.org and can't be used on other sites (e.g. the logo) and external elements Dreamwidth is allowed to use on its own site but not redistribute to other sites.  
+
Dreamwidth is divided into two parts: an open-source part called 'dw-free', and a private part called 'dw-nonfree'. The private part is composed of elements which are specific to dreamwidth.org and can't be used on other sites (e.g. the logo) and external elements Dreamwidth is allowed to use on its own site but can't redistribute to other sites.  
  
 
* To fork the free part go to https://github.com/dreamwidth/dw-free and click on Fork on the upper right corner.
 
* To fork the free part go to https://github.com/dreamwidth/dw-free and click on Fork on the upper right corner.
Line 41: Line 38:
 
== Get a Dreamhack ==
 
== Get a Dreamhack ==
  
Apply for a Dreamhack by [http://hack.dreamwidth.net/apply.shtml filling this form]. The two important fields are 'your desired username' and 'your email address'. Your username is used to manage your Dreamhack and create the URL where your Dreamhack will be located at so you can pick anything. Your email address is used to send you important information and various alerts.
+
Apply for a Dreamhack by [http://hack.dreamwidth.net/apply.shtml filling this form]. You can pick anything as your username. The email address you choose is used to send you important info and alerts.
: N.B. Some users like having a separate adress for their dev work but it's entirely up to you!
+
: N.B. Some users like having a separate address for their dev work but it's entirely up to you!
  
 
Once you're done, you should get an email with your login username and a password. Don't lose it.
 
Once you're done, you should get an email with your login username and a password. Don't lose it.
Line 49: Line 46:
 
== Install PuTTY ==
 
== Install PuTTY ==
  
* Download 'Windows installer for everything except PuTTYtel' .exe file at [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html PuTTY] and install it.
+
* Download it at [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html] and install it.
  
* Run PuTTY. In the configuration window, enter "hack.dreamwidth.net" for the host name. Go to Connection/Data and enter the username/login given to you in the welcome e-mail. It should be something like dh-username.
+
* Run PuTTY. In the configuration window, enter "ssh-hack.dreamwidth.net" for the host name. Go to Connection/Data and enter the username/login given to you in the welcome e-mail. It should be something like dh-username.
  
 
* Click on Open. If you get a pop-up message about a key, click Yes.
 
* Click on Open. If you get a pop-up message about a key, click Yes.
Line 67: Line 64:
 
== Install WinSCP ==
 
== Install WinSCP ==
  
* Install [http://winscp.net/eng/download.php WinSCP]. During the installation, you may be asked about the mode you prefer: Commander and Explorer. Commander works like an FTP client: a partitioned window with your computer files on one side and the Dreamhack files on the other. Explorer will only display your Dreamhack files and works like Windows's Explorer. Either mode is fine. Pick what you're most used to.
+
* Install it at [http://winscp.net/eng/download.php]. During the installation, you may be asked about the mode you prefer: Commander and Explorer. Commander works like an FTP client: a partitioned window with your computer files on one side and the Dreamhack files on the other. Explorer works like Windows Explorer and only displays your Dreamhack files. Either mode is fine. Pick what you're most used to.
  
* Use "hack.dreamwidth.net" for the host name. Enter your username and the password you typed when you did <code>passwd</code> on PuTTY. Click on Save then on Login.
+
* Use "ssh-hack.dreamwidth.net" for the host name. Enter your username and the password you typed when you did <code>passwd</code> on PuTTY. Click on Save then on Login.
  
  
Line 75: Line 72:
  
 
While you can use Notepad, I recommend [http://notepad-plus-plus.org/download/ Notepad++] instead. It's free, simple and will make editing much easier.
 
While you can use Notepad, I recommend [http://notepad-plus-plus.org/download/ Notepad++] instead. It's free, simple and will make editing much easier.
 
 
== Create a Bugzilla account ==
 
 
Simply [http://bugs.dwscoalition.org/createaccount.cgi click here]. Go to [http://bugs.dwscoalition.org/userprefs.cgi?tab=account Name and Password] and enter your name following this format: <code>Name [:username]</code>
 
 
'Name' can be your real name, a nickname, your username again, etc. Pick what you're comfortable with.
 
  
  
Line 122: Line 112:
 
Code is committed by developers all the time. You must always update your repositories before you do anything else.
 
Code is committed by developers all the time. You must always update your repositories before you do anything else.
  
* Go to [[Dev_Maintenance#dwu_-_Updating_the_repos | this article]] and enter all the code listed in the second, bigger section for both dw-free and dw-nonfree (but don't enter the lines starting with #).
+
* Go to [[Dev_Maintenance#dwu_-_Updating_the_repos | this article]] and follow the instructions given there.
  
* You can also create a script to make this process simpler as explained in the article.
+
* Make sure to check for updates as the script occasionally changes.
 
+
* Make sure to check for updates to see if the script has changed.
+
  
 
: N.B. To create a new file open WinSCP, right click into the correct folder (<code>/bin</code> here) then click on New/File.
 
: N.B. To create a new file open WinSCP, right click into the correct folder (<code>/bin</code> here) then click on New/File.
  
  
= Make changes to your local code =
+
= Make changes to your Dreamhack =
  
== Find or file a bug ==
+
== Find and claim issues ==
  
<strong>--> in Bugzilla</strong>
+
<strong>--> on github.com</strong>
 
+
* To find: you can use [http://bugs.dwscoalition.org/userprefs.cgi?tab=saved-searches predefined searches] such as [http://bugs.dwscoalition.org/buglist.cgi?cmdtype=dorem&remaction=run&namedcmd=unassigned%20effort-minor&sharer_id=2 unassigned effort-minor].
+
 
+
: Some of these bugs may not appear to be 'minor' to you. No worries. There are usually a few tiny bugs which only require small changes to be done (text to edit; elements to move, remove, add or hide from certain categories of users; [[Newbie_Guide:_How_to_Patch_Styles_and_Themes#Adding_a_new_color_theme|a color theme to add to a style]], etc.).
+
 
+
* To file: make sure it's not already been filed using [http://bugs.dwscoalition.org/query.cgi?format=specific simple search] or [http://bugs.dwscoalition.org/query.cgi?format=advanced advanced search] then [http://bugs.dwscoalition.org/enter_bug.cgi?product=Dreamwidth%20Development use this form] to file a new bug. Fill and edit the fields as needed.
+
 
+
* To assign a bug to yourself, click on Take next to Assign To and set the status to IN_PROGRESS.
+
  
 +
Issues are listed at https://github.com/dreamwidth/dw-free/issues and https://github.com/dreamwidth/dw-nonfree/issues. You can use the search bar at the top to browse labels.
 +
Once you've found something you like comment on the issue to 'claim' it.
  
== Create a local branch stemming from develop ==
+
== Create a branch stemming from develop ==
  
 
Important: in PuTTY, you can get explanations about bash commands using <code>help COMMAND</code> (e.g. <code>help cd</code>) and any git commands using <code>git COMMAND -h</code> (e.g <code>git pull -h</code>).
 
Important: in PuTTY, you can get explanations about bash commands using <code>help COMMAND</code> (e.g. <code>help cd</code>) and any git commands using <code>git COMMAND -h</code> (e.g <code>git pull -h</code>).
Line 160: Line 142:
 
<syntaxhighlight lang="bash">git checkout develop</syntaxhighlight>
 
<syntaxhighlight lang="bash">git checkout develop</syntaxhighlight>
  
* Now you can create a new branch specifically dedicated to the bug you want to work on:
+
* Now you can create a new branch specifically dedicated to the issue you want to work on:
  
 
<syntaxhighlight lang="bash">git branch BRANCH_NAME</syntaxhighlight>
 
<syntaxhighlight lang="bash">git branch BRANCH_NAME</syntaxhighlight>
  
: N.B. It is best if you use the bug number and a short description as your branch name: <code>bug####/short_description</code>
+
: N.B. Use the issue number and a short description as your branch name: <code>bug #xxx/short-description</code>
  
* To switch to this branch, use the <code>checkout</code> command again:
+
* Switch to your new branch:
  
 
<syntaxhighlight lang="bash">git checkout BRANCH_NAME</syntaxhighlight>
 
<syntaxhighlight lang="bash">git checkout BRANCH_NAME</syntaxhighlight>
  
 
* And that's it. Now you can start coding!
 
* And that's it. Now you can start coding!
 
  
 
== Work, work, work ==
 
== Work, work, work ==
  
<strong>--> in WinSCP and your editor</strong>
+
<strong>--> in WinSCP and your text editor</strong>
  
 
* In WinSCP right click to edit the file you want to work on.
 
* In WinSCP right click to edit the file you want to work on.
Line 181: Line 162:
 
* Remember that the free part of the code is in <code>~/dw/*</code> while the non-free part is in <code>~/dw/ext/dw-nonfree/*</code>.
 
* Remember that the free part of the code is in <code>~/dw/*</code> while the non-free part is in <code>~/dw/ext/dw-nonfree/*</code>.
  
* Site pages are either [[BML|.bml]] or [[TT|.tt]] files. You can find them in <code>~dw/htdocs/</code> and <code>~dw/views/</code>. They may use .pm modules/widgets, found in <code>~dw/cgi-bin/LJ/</code> and <code>~dw/cgi-bin/DW/</code>.
+
* Site pages are either [[BML|.bml]] or [[TT|.tt]] files. You can find them in <code>~dw/htdocs/</code> and <code>~dw/views/</code>. They may use .pm modules and widgets, found in <code>~dw/cgi-bin/LJ/</code> and <code>~dw/cgi-bin/DW/</code>.
  
* Text strings which are not in <code>~dw/htdocs/xxx.bml.text</code> and <code>~dw/views/xxx.tt.text</code> are in <code>~dw/bin/upgrading/en.dat</code>.
+
* Text strings are in <code>~dw/htdocs/xxx.bml.text</code>, <code>~dw/views/xxx.tt.text</code>) or <code>~dw/bin/upgrading/en.dat</code>.
  
 
* For more specific searches, see [[Dev_Finding_Things|this article]] on how to use <code>rgrep</code> and <code>find</code>.
 
* For more specific searches, see [[Dev_Finding_Things|this article]] on how to use <code>rgrep</code> and <code>find</code>.
Line 197: Line 178:
  
  
== Mark your local changes as ready to be committed ==
+
== Mark your changes as ready to be committed ==
  
 
<strong>--> in PuTTY</strong>
 
<strong>--> in PuTTY</strong>
Line 215: Line 196:
 
<syntaxhighlight lang="bash">git add .</syntaxhighlight>
 
<syntaxhighlight lang="bash">git add .</syntaxhighlight>
  
* If you realize you need to do some more work, edit files again and use <code>add</code> again when you're done. It's that simple.
+
* If you realize you need to do some more work, edit the files again and use <code>add</code> when you're done. It's that simple.
  
  
== Commit your changes locally ==
+
== Commit your changes ==
  
 
<strong>--> in PuTTY</strong>
 
<strong>--> in PuTTY</strong>
  
* If you think you're done with your work at this point you can commit your changes locally:
+
* If you think you're done with your work at this point you can commit your changes:
  
 
<syntaxhighlight lang="bash">git commit</syntaxhighlight>
 
<syntaxhighlight lang="bash">git commit</syntaxhighlight>
Line 230: Line 211:
 
* Here's an example of commit message:
 
* Here's an example of commit message:
  
<code>(Bug #123) Short subject
+
<code>Bug #123. Short subject
 +
 
 +
Fixes #123.
  
 
Patch description
 
Patch description
Line 246: Line 229:
 
* If you want to pace yourself or be easily able to go back to a certain point in your work you can do successive commits instead of one big final one.
 
* If you want to pace yourself or be easily able to go back to a certain point in your work you can do successive commits instead of one big final one.
  
 +
= Publish your code =
  
= Go from local to global =
+
== Push your code to your github.com repository ==
 
+
== Push the changes to your github.com repository ==
+
  
 
<strong>--> in PuTTY</strong>
 
<strong>--> in PuTTY</strong>
  
You should only push your local changes to your develop branch on github.com once you're happy with your patch as things are a bit harder to change at this point. Once you've finished your work use the <code>push</code> command and the branch name:
+
You should only push your changes to your develop branch on github.com once you're happy with your patch as things are a bit harder to change at this point. Once you've finished your work use the <code>push</code> command and the branch name:
  
 
<syntaxhighlight lang="bash">git push origin BRANCH_NAME</syntaxhighlight>
 
<syntaxhighlight lang="bash">git push origin BRANCH_NAME</syntaxhighlight>
  
  
== Request your changes to be pulled into the original Dreamwidth repository ==
+
== Request your code to be pulled into the original Dreamwidth repository ==
  
 
<strong>--> on github.com</strong>
 
<strong>--> on github.com</strong>
  
Go to your profile page on GitHub. Select the Public Activity tab. Spot the line where it says you've created a new branch. Click on the branch name. Click on Compare to make sure things are how you want them to be. Once you've checked things over, click on Pull Request at the top.
+
Go to your profile page on GitHub. Select the Public Activity tab. Spot the line where it says you've created a new branch. Click on the branch name then on Compare and Pull Request. Once you've checked things over, click on Send Pull Request on the right side.
 +
Finally, comment on the pull request to say it 'fixes #xxx' where #xxx is the issue number.
  
 
: N.B. If there's an unusual delay between the moment you pushed your branch and the moment it appears on GitHub, [https://status.github.com/ check the status page].
 
: N.B. If there's an unusual delay between the moment you pushed your branch and the moment it appears on GitHub, [https://status.github.com/ check the status page].
Line 269: Line 252:
 
== What now? ==
 
== What now? ==
  
<strong>--> in Bugzilla</strong>
+
<strong>--> on github.com</strong>
  
* You'll get an email notification once your changes have been accepted and pulled into the Dreamwidth code (i.e. merged into the original develop branch), and the bug will be closed if no more work is needed.
+
* You'll get a notification once your pull request has been merged into the original develop branch, and the issue will be closed if no more work is needed.
  
<strong>--> on github.com</strong>
+
* On your profile your request will be marked as merged.
 
+
* On your GitHub profile your request will be marked as merged.
+
  
 
* That's it! You're done. Congratulations!
 
* That's it! You're done. Congratulations!
  
  
= Help! Troubleshooting tips =
+
= Help! =
 
+
== My branch has commits from another user! ==
+
 
+
<strong>--> in PuTTY</strong>
+
 
+
If you realize once you've pushed your branch to github.com that you built it upon another pull request that has been merged since then and that your branch now has commits from another user, don't panic. If these commits don't affect yours, you can easily rebase your branch against develop as explained in [[#How_to_update_your_branch|this how to]]. The system will see that some of the commits on your branch have already been merged into develop and will skip them, thus leaving only your own unmerged commits on your branch. There, all clean! All you have to do is push your branch again.
+
 
+
 
+
== Issues with text strings ==
+
 
+
* As <dwuser>denise</dwuser> explained [http://dw-dev-training.dreamwidth.org/13233.html here], you need to delete old text strings and create new ones when you edit .text files or en.dat instead of simply editing the text. If the change isn't critical - the string doesn't need to be renamed or the text change is minor - it's better to notify the site copy team so that text can be changed locally and the original file left alone.
+
 
+
* If text you've modified doesn't appear on the site after a code push, append <code>?uselang=debug</code> to the page URL to make sure it's using the right string. If it is and it still doesn't display after a while, comment on <dwcomm>dw_maintenance</dwcomm>.
+
 
+
 
+
== Starting over ==
+
 
+
If something's wrong you can:
+
* delete your GitHub repositories on github.com: go to your repository, click on Admin then scroll down to 'Delete this repository'.
+
* then [[Moving_your_Dreamwidth_installation_to_use_Github#Stop_the_server_and_all_workers | go through these steps again]].
+
  
If something's *really* wrong you can also [[Dreamhack_Troubleshooting#I_want_to_wipe_my_install_and_start_over|rebuild you Dreamhack completely and start over from scratch]].
+
If something's wrong you can always ask for help at <dwcomm>dw_dev_training</dwcomm> or on the #dreamwidth-dev [[:Category:IRC|IRC]] channel.
  
  
= Going further / References =
+
= Reading / References =
  
To understand things better, I suggest reading relevant sections of [http://rogerdudler.github.com/git-guide/index.html Git - The Simple Guide], watching part of <em>Git for Ages 4 and Up</em> ([http://www.youtube.com/watch?v=1ffBJ4sVUb4 Watch on YouTube] or [http://mirror.internode.on.net/pub/linux.conf.au/2013/mp4/Git_For_Ages_4_And_Up.mp4 Download]), and reading the first three chapters of [http://git-scm.com/book Pro Git].
+
To understand things better, I suggest reading [http://guides.github.com/overviews/flow/ the GitHub Workflow guide from github.com], relevant sections of [http://rogerdudler.github.com/git-guide/index.html Git - The Simple Guide], watching part of <em>Git for Ages 4 and Up</em> ([http://www.youtube.com/watch?v=1ffBJ4sVUb4 Watch on YouTube] or [http://mirror.internode.on.net/pub/linux.conf.au/2013/mp4/Git_For_Ages_4_And_Up.mp4 Download]), and reading the first three chapters of [http://git-scm.com/book Pro Git].
  
For lots of useful commands, see [[How-To_on_Git_for_Newbies|these how-tos]].
+
For lots of useful commands, see [[Git How To]].
  
 
Other useful references:
 
Other useful references:
Line 315: Line 276:
 
* [[Moving_your_Dreamwidth_installation_to_use_Github|Moving to GitHub]]
 
* [[Moving_your_Dreamwidth_installation_to_use_Github|Moving to GitHub]]
 
* [[Dev_Maintenance|Development Maintenance]]
 
* [[Dev_Maintenance|Development Maintenance]]
* [[Draft:_Github_development_process|Github Development Process]]
 
 
* [http://ss64.com/bash/ Bash commands]
 
* [http://ss64.com/bash/ Bash commands]
 
* [[Git_Getting_Started|Git: Getting Started]]
 
* [[Git_Getting_Started|Git: Getting Started]]
Line 321: Line 281:
 
* [http://git-scm.com/book/commands Pro Git - Index of Commands]
 
* [http://git-scm.com/book/commands Pro Git - Index of Commands]
 
* [http://git-scm.com/docs Git Reference]
 
* [http://git-scm.com/docs Git Reference]
* [http://dw-dev.dreamwidth.org/17146.html Mark's instructions on Bugzilla usernames.]
 
  
 
[[Category:Dreamhack]]
 
[[Category:Dreamhack]]

Latest revision as of 04:47, 4 April 2017

Note: Feel free to correct, expand, do anything which could make this better and clearer. ^_^
Note: If you have a different OS you may still find this helpful. While you may not need to install and set up any software the rest is pretty much universal.

Contributor Licensing Agreement

The very first thing you need to do is read and sign a Contributor Licensing Agreement and mail it to Denise. If you don't agree with its terms Dreamwidth won't be able to accept your code; if you've submitted code but Denise doesn't have your CLA your code can't be used. So read it, think it over, sign it, mail it then wait until you're told it's been received. Now you can get started.


What do you need and why?

Because you're on Windows, you have to use quite a number of tools to access and manage things so this part might seem a little daunting. The good news is that 1) you're used to being flexible and resourceful, right? 2) once you've got everything set up things will be much simpler and intuitive.

So what do you need?

  1. You need a github.com account to be able to fetch and copy the Dreamwith code, find issues to work on, and publish your code so it can be integrated to Dreamwidth. This is both where all the Dreamwidth code comes from and where your own code will end up but you won't do much work on the site itself.
  2. You need a Dreamhack to see what your changes will do on the site for real. Think of a Dreamhack as an online mirror of the Dreamwidth site which you can do whatever you want with.
  3. You need PuTTY to connect github.com to your Dreamhack, to connect your Dreamhack to github.com, and manage your work. Think of PuTTY as your command center.
  4. You need WinSCP to visualize your Dreamhack files and be able to open them in a text editor. Think of WinSCP as a Dreamhack Explorer.
  5. You need a text editor to edit your files.

Create an account on GitHub

Go to GitHub and create your account.


On your GitHub account

You need to fork the Dreamwidth code onto your own account. Forking is like cloning and branching. It will copy the code and also label your copy as being a branch (a fork) of the original Dreamwidth code so that everybody knows the two are connected.

Dreamwidth is divided into two parts: an open-source part called 'dw-free', and a private part called 'dw-nonfree'. The private part is composed of elements which are specific to dreamwidth.org and can't be used on other sites (e.g. the logo) and external elements Dreamwidth is allowed to use on its own site but can't redistribute to other sites.


Get a Dreamhack

Apply for a Dreamhack by filling this form. You can pick anything as your username. The email address you choose is used to send you important info and alerts.

N.B. Some users like having a separate address for their dev work but it's entirely up to you!

Once you're done, you should get an email with your login username and a password. Don't lose it.


Install PuTTY

  • Download it at [1] and install it.
  • Run PuTTY. In the configuration window, enter "ssh-hack.dreamwidth.net" for the host name. Go to Connection/Data and enter the username/login given to you in the welcome e-mail. It should be something like dh-username.
  • Click on Open. If you get a pop-up message about a key, click Yes.
  • Enter the password given to you in the welcome email when asked. Note that characters aren't displayed and the cursor doesn't move. It's normal.
  • Change your password by typing:
passwd
  • Your default Dreamhack account is called 'system'. Set its password with this command:
$LJHOME/bin/upgrading/make_system.pl


Install WinSCP

  • Install it at [2]. During the installation, you may be asked about the mode you prefer: Commander and Explorer. Commander works like an FTP client: a partitioned window with your computer files on one side and the Dreamhack files on the other. Explorer works like Windows Explorer and only displays your Dreamhack files. Either mode is fine. Pick what you're most used to.
  • Use "ssh-hack.dreamwidth.net" for the host name. Enter your username and the password you typed when you did passwd on PuTTY. Click on Save then on Login.


Get a good text editor

While you can use Notepad, I recommend Notepad++ instead. It's free, simple and will make editing much easier.


Set things up

Further configuration steps

These are not mandatory but will certainly make your life easier.

Change some git settings

In PuTTY, I suggest going through all the steps mentioned in this section.


Give special abilities to your system account


Get rid of invite codes

  • In WinSCP, go to /dw/ext/local/etc/, and double-click on config.pl. Find $USE_ACCT_CODES = 1; and change 1 to 0. Save your file.


Customize PuTTY and Notepad++

See these articles for details: PuTTY, Notepad++.


Update your code

--> in PuTTY

Code is committed by developers all the time. You must always update your repositories before you do anything else.

  • Make sure to check for updates as the script occasionally changes.
N.B. To create a new file open WinSCP, right click into the correct folder (/bin here) then click on New/File.


Make changes to your Dreamhack

Find and claim issues

--> on github.com

Issues are listed at https://github.com/dreamwidth/dw-free/issues and https://github.com/dreamwidth/dw-nonfree/issues. You can use the search bar at the top to browse labels. Once you've found something you like comment on the issue to 'claim' it.

Create a branch stemming from develop

Important: in PuTTY, you can get explanations about bash commands using help COMMAND (e.g. help cd) and any git commands using git COMMAND -h (e.g git pull -h).

--> in PuTTY

  • Pick the correct repository:
    • if you want to work in dw-free you need to be in ~/dw$. If you're not type cd $LJHOME.
    • if you want to work in dw-nonfree you need to be in ~/dw/ext/dw-nonfree$. If you're not type cd $LJHOME/ext/dw-nonfree
  • Then make sure you're in the develop branch using the checkout command:
git checkout develop
  • Now you can create a new branch specifically dedicated to the issue you want to work on:
git branch BRANCH_NAME
N.B. Use the issue number and a short description as your branch name: bug #xxx/short-description
  • Switch to your new branch:
git checkout BRANCH_NAME
  • And that's it. Now you can start coding!

Work, work, work

--> in WinSCP and your text editor

  • In WinSCP right click to edit the file you want to work on.
  • Remember that the free part of the code is in ~/dw/* while the non-free part is in ~/dw/ext/dw-nonfree/*.
  • Site pages are either .bml or .tt files. You can find them in ~dw/htdocs/ and ~dw/views/. They may use .pm modules and widgets, found in ~dw/cgi-bin/LJ/ and ~dw/cgi-bin/DW/.
  • Text strings are in ~dw/htdocs/xxx.bml.text, ~dw/views/xxx.tt.text) or ~dw/bin/upgrading/en.dat.
  • For more specific searches, see this article on how to use rgrep and find.


Test your changes

--> on your Dreamhack

Go to your Dreamhack and test. Edit the files again in WinSCP if more changes are needed. Go through these steps again to test your new changes.

N.B. In some rare instances, your changes won't go live instantly on your hack and you may need to update your database first.


Mark your changes as ready to be committed

--> in PuTTY

Before being committed, work is moved to the index or staging area. Think of it as the "Ready? Steady?" before the "Go!". At this point nothing is definite and you can easily change things.

  • To add the changes you've made on a specific file:
git add FILE_NAME
  • To add all files which have been edited or deleted at once:
git add -u
  • To add all files which have been added, deleted or edited at once:
git add .
  • If you realize you need to do some more work, edit the files again and use add when you're done. It's that simple.


Commit your changes

--> in PuTTY

  • If you think you're done with your work at this point you can commit your changes:
git commit
  • This will open the nano editor so you can type a commit message. Unfortunately, nano isn't very easy to type into (you can't use the number pad for instance) so I advise you to type your commit message in your text editor then paste it in nano (right click in PuTTY to paste).
  • Here's an example of commit message:

Bug #123. Short subject

Fixes #123.

Patch description

Description can go on several short lines.

  • Hit Ctrl+X, 'y' then Enter to save your message.
  • If you you need to do some more work later you can update your commit:
git commit --amend
N.B. You can also do this if you need to edit your commit message.
  • If you want to pace yourself or be easily able to go back to a certain point in your work you can do successive commits instead of one big final one.

Publish your code

Push your code to your github.com repository

--> in PuTTY

You should only push your changes to your develop branch on github.com once you're happy with your patch as things are a bit harder to change at this point. Once you've finished your work use the push command and the branch name:

git push origin BRANCH_NAME


Request your code to be pulled into the original Dreamwidth repository

--> on github.com

Go to your profile page on GitHub. Select the Public Activity tab. Spot the line where it says you've created a new branch. Click on the branch name then on Compare and Pull Request. Once you've checked things over, click on Send Pull Request on the right side. Finally, comment on the pull request to say it 'fixes #xxx' where #xxx is the issue number.

N.B. If there's an unusual delay between the moment you pushed your branch and the moment it appears on GitHub, check the status page.


What now?

--> on github.com

  • You'll get a notification once your pull request has been merged into the original develop branch, and the issue will be closed if no more work is needed.
  • On your profile your request will be marked as merged.
  • That's it! You're done. Congratulations!


Help!

If something's wrong you can always ask for help at [info]dw_dev_training or on the #dreamwidth-dev IRC channel.


Reading / References

To understand things better, I suggest reading the GitHub Workflow guide from github.com, relevant sections of Git - The Simple Guide, watching part of Git for Ages 4 and Up (Watch on YouTube or Download), and reading the first three chapters of Pro Git.

For lots of useful commands, see Git How To.

Other useful references: