Difference between revisions of "Dev Maintenance"

From Dreamwidth Notes
Jump to: navigation, search
(tocvs - Switch between /cvs and live directories: A few improvements.)
(Update your database: Test database update (notably for dreamhacks))
 
(82 intermediate revisions by 21 users not shown)
Line 1: Line 1:
== Updating your code ==
+
== Updating the Dreamwidth code on your Dreamhack ==
  
{{Warn|text='''VERY IMPORTANT: If you have custom changes that you have not committed or patched out, you want to do that first!  If you follow these steps without doing so, you will likely muck things up.'''}}
+
=== Shutting down apache ===
  
 
It is best to shut your Apache instance down before doing the update process, to make sure that everything, especially scripts in cgi-bin/ are reloaded properly:
 
It is best to shut your Apache instance down before doing the update process, to make sure that everything, especially scripts in cgi-bin/ are reloaded properly:
  
  sudo /etc/init.d/apache2 stop
+
  stop-apache
  
Okay.  Let's say you've been running your Dreamwidth install and you want to pull down the latest and greatest in fixes.  This is pretty easy.
+
=== Getting updates from Github ===
 +
 
 +
Okay.  Let's say you've been running your Dreamwidth install and you want to pull down the latest and greatest in fixes.  This is pretty easy. First, if you are not already somewhere in your site's directory, get into that directory:
  
 
  cd $LJHOME
 
  cd $LJHOME
bin/cvsreport.pl -update
 
# only sync changes from the CVS to the live code
 
bin/cvsreport.pl -sync -cvsonly
 
bin/cvsreport.pl -sync -cvsonly
 
  
Yes, you do it twice. If the multicvs.conf file changed, then the first one pulls that file in, and the second one will notice whatever changed according to that file.  99% of the time once is enough, but every once in a while... so it's a good habit to have.
+
Then grab updates from the development branch of Dreamwidth's repository:
 +
 
 +
  git fetch dreamwidth
 +
git checkout main && git pull --ff-only dreamwidth main:main
 +
 
 +
If your installation hasn't been updated to use <code>main</code> instead of <code>master</code> for the primary development branch, see [https://dw-dev.dreamwidth.org/232594.html this post from Mark] detailing the necessary steps to get up to speed.
 +
 
 +
Once you've updated, you will also want to push the Dreamwidth repository changes to your fork on Github:
 +
 
 +
git push origin main
 +
 
 +
If you have uncommitted changes, you'll get an error message and will need to use [[Git How To#How_to_stash_your_changes|git stash]].
 +
 
 +
 
 +
=== Update your database ===
 +
 
 +
Now that your code has been updated, update the database:
  
 
  # order of commands is important
 
  # order of commands is important
Line 21: Line 35:
 
  $LJHOME/bin/upgrading/update-db.pl -r --cluster=all --innodb
 
  $LJHOME/bin/upgrading/update-db.pl -r --cluster=all --innodb
 
  $LJHOME/bin/upgrading/texttool.pl load
 
  $LJHOME/bin/upgrading/texttool.pl load
 +
# if you have a test database (you have one if you have a dreamhack)
 +
DW_TEST=1 $LJHOME/bin/upgrading/update-db.pl -r -p --innodb
 +
DW_TEST=1 $LJHOME/bin/upgrading/update-db.pl -r --cluster=all --innodb
 +
DW_TEST=1 $LJHOME/bin/upgrading/texttool.pl load
  
Now you can restart Apache:
+
Remember that different branches might have different text strings you have added, and that you might need to update your database for different branches when you are working on them for those text strings to work.  The same applies for any database changes made by different branches you are working on.
  
sudo /etc/init.d/apache2 start
+
=== Compile the SCSS and other static files ===
  
Of course, in a production environment, this whole process is not too recommended as you never know what kind of code you're going to get.  But for the most part, it's fairly straightforward. (And if you're doing development, this is generally safe.)
+
You'll also want to compile any changes to the static files. This will convert SCSS into CSS, as well as recompressing any changed javascript files, into the static build directory:
  
=== Updating to the production branch ===
+
$LJHOME/bin/build-static.sh
  
You can see what branch you are currently on by going to <code>$LJHOME/cvs/dw-free</code>:
+
=== Restart the server ===
  
cd $LJHOME/cvs/dw-free
+
Now you can restart Apache:
hg branch
+
  
 +
start-apache
  
Work is being done on the 'production' branchWhen you create a new copy of the repository, it gets the branch with the label 'tip'.  This <i>should</i> be the 'production' branch. You can sync to the 'tip' branch by using:
+
Of course, in a production environment, this whole process is not too recommended as you never know what kind of code you're going to getBut for the most part, it's fairly straightforward(And if you're doing development, this is generally safe.)
  
hg update -C tip
+
== Additional Information for Non-Dreamhack Users ==
  
{{Warn|text=The -C option means "clean" and it removes all your local modifications.}}
+
This section is only for you if you're running your own installation.
  
If for some reason 'tip' is not pointing to 'production', then you can sync to 'production' manually by doing 'hg update -C production'
+
Instead of using start-apache/stop-apache, which are Dreamhack-specific scripts, use these commands:
  
To be running production code, you also need to sync to your live code from the repository copy:
+
sudo /etc/init.d/apache2 start
 +
sudo /etc/init.d/apache2 stop
  
bin/cvsreport.pl -sync -cvsonly
+
You'll also want to update packages on your system at some point. On Ubuntu, this would be done using:
 
+
== Updating your system ==
+
 
+
On Ubuntu, you can update the packages on your system with:
+
  
 
  apt-get update
 
  apt-get update
Line 61: Line 76:
 
== Scripting ==
 
== Scripting ==
  
You can, of course, use scripts to make it easier for you to do most of this.  Some example scripts are given below.
+
{{Warn|text="These scripts have not been thoroughly tested yet with the new system; they might not be updated entirely or right."}}
 +
 
 +
You can, of course, use scripts to make it easier for you to do some of this.   
 +
 
 +
There is an epic "omnibus" script by <dwuser>jeshyr</dwuser> available at http://dw-dev.dreamwidth.org/94822.html which incorporates all the individual scripts listed here and some other useful functions, and includes help information. It'll save you a heap of angst as a beginner!
 +
 
 +
Some simpler example scripts are given below.
  
 
=== dwu - Updating the repos ===
 
=== dwu - Updating the repos ===
Line 68: Line 89:
  
 
<source lang="bash">#!/bin/bash
 
<source lang="bash">#!/bin/bash
hg -R $LJHOME/cvs/dw-free qpop -a && \
 
$LJHOME/bin/cvsreport.pl -u && \
 
hg -R $LJHOME/cvs/dw-free qpush -a</source>
 
  
Now, when you type 'dwu', this script will pop out any MQ patches you may have currently in dw-free, update the code to the latest available, and push your dw-free MQ patches back. (if you need support for dw-nonfree too, just duplicate the lines mentioning dw-free and edit them to say dw-nonfree)
+
# make sure we are in the right directory;
 +
cd $LJHOME
  
=== dws - Syncing the live code ===
+
git fetch dreamwidth
  
Put this code in a file called '''~/bin/dws''' and make it executable with '''chmod ugo+x ~/bin/dws''':
+
# pull changes from dreamwidth
 +
git checkout master
 +
git pull --ff-only dreamwidth master
  
<source lang="bash">#!/bin/bash
+
# push them to Github forks
$LJHOME/bin/cvsreport.pl -s -c && \
+
git push origin master
$LJHOME/bin/cvsreport.pl -s -c</source>
+
  
This script will synchronise the live code twice when you type 'dws'.
+
# restore our old position
 +
git checkout -
 +
 
 +
# check to see if we have a dw-nonfree directory; if we do, update that too
 +
if [ -d "$LJHOME/ext/dw-nonfree" ]; then
 +
  # change to dw-nonfree
 +
  cd $LJHOME/ext/dw-nonfree
 +
 
 +
  git fetch dreamwidth
 +
 
 +
  # pull changes from dw-nonfree
 +
  git checkout master
 +
  git pull --ff-only dreamwidth master
 +
 
 +
  # push them to Github forks
 +
  git push origin master
 +
 
 +
  # restore our old position
 +
  git checkout -
 +
fi
 +
</source>
 +
 
 +
Now, when you type 'dwu', this script will update your dw-free and (if you have it) dw-nonfree repositories.
  
 
=== dwdb - Updating the database ===
 
=== dwdb - Updating the database ===
Line 89: Line 131:
  
 
<source lang="bash">#!/bin/bash
 
<source lang="bash">#!/bin/bash
$LJHOME/bin/upgrading/update-db.pl -r -p --innodb && \
+
$LJHOME/bin/upgrading/update-db.pl -r -p --innodb &&
$LJHOME/bin/upgrading/update-db.pl -r --cluster=all --innodb && \
+
$LJHOME/bin/upgrading/update-db.pl -r --cluster=all --innodb &&
 
$LJHOME/bin/upgrading/texttool.pl load</source>
 
$LJHOME/bin/upgrading/texttool.pl load</source>
  
 
This will update the database when you type 'dwdb'.
 
This will update the database when you type 'dwdb'.
  
=== tocvs - Switch between /cvs and live directories ===
+
=== comp - Recompiling the compass files ===
  
Put this code in a file called '''~/bin/tocvs.real''', but do not make it executable:
+
Put this code in a file called "'~/bin/comp'" and make it executable with "'chmod ugo+x ~/bin/comp'":
  
 
<source lang="bash">#!/bin/bash
 
<source lang="bash">#!/bin/bash
DIR=`pwd`
+
cd "$LJHOME" &&
REPO=${1-'dw-free'}
+
compass compile &&
 +
cd ext/dw-nonfree &&
 +
compass compile</source>
  
if  [[ "$REPO" == "f" ]]; then REPO="dw-free";    fi
+
This will recompile the CSS files.
if  [[ "$REPO" == "n" ]]; then REPO="dw-nonfree"; fi
+
 
+
if [[ "$DIR" =~ ^$LJHOME ]]; then
+
  if [[ "$DIR" =~ ^$LJHOME/cvs/([^\/]+) ]]; then
+
    FROMREPO=${BASH_REMATCH[1]}
+
    if [[ "$1" == "" ]]; then
+
      DIR=${DIR/#$LJHOME\/cvs\/$FROMREPO/$LJHOME}
+
    else
+
      DIR=${DIR/#$LJHOME\/cvs\/$FROMREPO/$LJHOME\/cvs\/$REPO}
+
    fi
+
  else
+
    DIR=${DIR/#$LJHOME/$LJHOME\/cvs\/$REPO}
+
  fi
+
fi
+
cd $DIR
+
</source>
+
  
Now edit your '''~/.bashrc''' file and add the following line to the end:
+
==Cleaning up your directories==
  
<source lang="bash">alias tocvs="source ~/bin/tocvs.real"</source>
+
If you do any amount of work, you'll find that your directories get cluttered with .orig and .rej files everywhere. This script will clean those up:
  
Then, log out and back in for the change to take effect. Now, whenever you're in a code directory, you can use 'tocvs' to switch back and forth from the live directory and the corresponding /cvs directory. It defaults to 'dw-free'; if you wish to go to another repository instead (for example, 'dw-nonfree'), give it as a parameter. (for example, 'tocvs dw-nonfree'). If you specify a repo name while you're already in a repository, it will switch to the named repository.
+
<source lang="bash">git clean -f "*.rej" "*.orig"</source>
  
The repositories 'dw-free' and 'dw-nonfree' are aliased as 'f' and 'n' respectively.
+
You can run it from the command line, or put it in a file called ~/bin/tidy and make it executable with "chmod +x ~/bin/tidy". If you do that, you'll be able to just type "tidy" to clean house.
  
 
[[Category: Development]]
 
[[Category: Development]]
 +
[[Category: Dreamhack]]

Latest revision as of 22:57, 29 April 2024

Updating the Dreamwidth code on your Dreamhack

Shutting down apache

It is best to shut your Apache instance down before doing the update process, to make sure that everything, especially scripts in cgi-bin/ are reloaded properly:

stop-apache

Getting updates from Github

Okay. Let's say you've been running your Dreamwidth install and you want to pull down the latest and greatest in fixes. This is pretty easy. First, if you are not already somewhere in your site's directory, get into that directory:

cd $LJHOME

Then grab updates from the development branch of Dreamwidth's repository:

git fetch dreamwidth
git checkout main && git pull --ff-only dreamwidth main:main

If your installation hasn't been updated to use main instead of master for the primary development branch, see this post from Mark detailing the necessary steps to get up to speed.

Once you've updated, you will also want to push the Dreamwidth repository changes to your fork on Github:

git push origin main

If you have uncommitted changes, you'll get an error message and will need to use git stash.


Update your database

Now that your code has been updated, update the database:

# order of commands is important
$LJHOME/bin/upgrading/update-db.pl -r -p --innodb
$LJHOME/bin/upgrading/update-db.pl -r --cluster=all --innodb
$LJHOME/bin/upgrading/texttool.pl load
# if you have a test database (you have one if you have a dreamhack)
DW_TEST=1 $LJHOME/bin/upgrading/update-db.pl -r -p --innodb
DW_TEST=1 $LJHOME/bin/upgrading/update-db.pl -r --cluster=all --innodb
DW_TEST=1 $LJHOME/bin/upgrading/texttool.pl load

Remember that different branches might have different text strings you have added, and that you might need to update your database for different branches when you are working on them for those text strings to work. The same applies for any database changes made by different branches you are working on.

Compile the SCSS and other static files

You'll also want to compile any changes to the static files. This will convert SCSS into CSS, as well as recompressing any changed javascript files, into the static build directory:

$LJHOME/bin/build-static.sh

Restart the server

Now you can restart Apache:

start-apache

Of course, in a production environment, this whole process is not too recommended as you never know what kind of code you're going to get. But for the most part, it's fairly straightforward. (And if you're doing development, this is generally safe.)

Additional Information for Non-Dreamhack Users

This section is only for you if you're running your own installation.

Instead of using start-apache/stop-apache, which are Dreamhack-specific scripts, use these commands:

sudo /etc/init.d/apache2 start
sudo /etc/init.d/apache2 stop 

You'll also want to update packages on your system at some point. On Ubuntu, this would be done using:

apt-get update
apt-get upgrade

Or, if you want an easy command to run on your dw account in one swoop:

sudo apt-get update && sudo apt-get upgrade

Scripting

Warning: "These scripts have not been thoroughly tested yet with the new system; they might not be updated entirely or right."

You can, of course, use scripts to make it easier for you to do some of this.

There is an epic "omnibus" script by [info]jeshyr available at http://dw-dev.dreamwidth.org/94822.html which incorporates all the individual scripts listed here and some other useful functions, and includes help information. It'll save you a heap of angst as a beginner!

Some simpler example scripts are given below.

dwu - Updating the repos

Put this code in a file called ~/bin/dwu and make it executable with chmod ugo+x ~/bin/dwu:

#!/bin/bash
 
# make sure we are in the right directory;
cd $LJHOME
 
git fetch dreamwidth
 
# pull changes from dreamwidth
git checkout master
git pull --ff-only dreamwidth master
 
# push them to Github forks
git push origin master
 
# restore our old position
git checkout -
 
# check to see if we have a dw-nonfree directory; if we do, update that too
if [ -d "$LJHOME/ext/dw-nonfree" ]; then
  # change to dw-nonfree
  cd $LJHOME/ext/dw-nonfree
 
  git fetch dreamwidth
 
  # pull changes from dw-nonfree
  git checkout master
  git pull --ff-only dreamwidth master
 
  # push them to Github forks
  git push origin master
 
  # restore our old position
  git checkout -
fi

Now, when you type 'dwu', this script will update your dw-free and (if you have it) dw-nonfree repositories.

dwdb - Updating the database

Put this code in a file called ~/bin/dwdb and make it executable with chmod ugo+x ~/bin/dwdb:

#!/bin/bash
$LJHOME/bin/upgrading/update-db.pl -r -p --innodb &&
$LJHOME/bin/upgrading/update-db.pl -r --cluster=all --innodb &&
$LJHOME/bin/upgrading/texttool.pl load

This will update the database when you type 'dwdb'.

comp - Recompiling the compass files

Put this code in a file called "'~/bin/comp'" and make it executable with "'chmod ugo+x ~/bin/comp'":

#!/bin/bash
cd "$LJHOME" &&
compass compile &&
cd ext/dw-nonfree &&
compass compile

This will recompile the CSS files.

Cleaning up your directories

If you do any amount of work, you'll find that your directories get cluttered with .orig and .rej files everywhere. This script will clean those up:

git clean -f "*.rej" "*.orig"

You can run it from the command line, or put it in a file called ~/bin/tidy and make it executable with "chmod +x ~/bin/tidy". If you do that, you'll be able to just type "tidy" to clean house.