Difference between revisions of "Beginning dev checklist"

Revision as of 09:07, 5 October 2010

We believe that our mentoring process is an investment in our future and in the future of Open Source. By teaching people -- no matter how experienced or inexperienced -- how to contribute to our codebase, we're building our own next generation of contributors. Every hour that we spend training someone to contribute is paid back tenfold, in multiple ways: we get more patches submitted, we get more people who can mentor other people, we get better documentation, and we get more people into the Open Source world.

If you're interested in beginning development with us, we'll teach you. Here's the absolute basic framework of what you need to know, what you need to have, and what you need to learn. We'll fill it in with links to Wiki articles explaining each step of the process.

Be aware that a lot of this article comes from the viewpoint that you'll be using a Dreamhack. More important information, including the step-by-step list of things you should do the first time you connect to your Dreamhack, can be found at Dreamhack getting started.

Even if you're an experienced Open Source developer, please skim over this article to familiarize yourself with the way we do things!

Setting up and working with a development environment

Getting a development environment

The absolute first thing you'll need is a development environment: someplace where you can host the code you're going to be working on. This will be a complete local installation of the Dreamwidth service, running on a separate server. If you're comfortable with installing the code yourself, see Dev Getting Started. If you absolutely don't know where to start, are overwhelmed at the idea of trying, we offer hosted development installations on our Dreamhack service: we'll do the initial install for you. (You'll have to keep it upgraded after that.)

Working with Unix

The Dreamwidth code runs under Unix (specifically, Ubuntu Linux). If you've never used Unix before, you might want to read over a tutorial on how to approach the system, how to use the command line, how to create files, delete files, move files, and other useful things. For the rest of this list, I'll assume you're familiar with the basics of directory structures. In particular, you use the symbol ~ to represent your home directory: the top-level directory that everything else goes in.

The location of $LJHOME

Some instructions on the wiki will mention $LJHOME (must be all caps). This is where your Dreamwidth code can be found. You can use it as-is.

For example, on a Dreamhack, cd $LJHOME/... is the same as cd ~/dw/... (as this is the directory that $LJHOME points to), and will change your directory to ~/dw/...

Accessing your files

Once you have a development environment, you'll need to access the files on them (in order to change them). This involves downloading a program that will do SSH, or "secure shell". It lets you connect to the other site (in this case your dev server) and work with the files, which you can't do through your browser. If you're running Windows, download PuTTY. If you're on a Mac or a Linux distribution, you won't need a separate program; the Terminal (Applications/Utilities/Terminal on the Mac) will let you connect.

Use your SSH system to go to hack.dreamwidth.net. Enter the username and password provided in your Dreamhack setup email.

Set the system user password

Your Dreamhack installation has a user named 'system', which has all the admin privs and owns all the system styles. The system account is the first account on the server. You need to set a password so you can log into it. Type:

$LJHOME/bin/upgrading/make_system.pl

Pick something you'll remember. (If you ever forget the system password, though, you can just run make_system.pl again and re-set it.)

Set up for test users

You are probably going to want to create test users on your Dreamhack. By default your Dreamhack installation will ask for invite codes. You can generate your own invite codes on your Dreamhack, or disable this. Instructions on disabling this are included further down.

You are likely to want at least two test accounts, for example so one can subscribe to inbox/email notifications of entries posted by another. You can create test accounts as you find you need them.

Start programming

Editors

Once you've done all that, you're ready to start programming! You're going to need to use an editor: something that will let you edit the files you're working with. There are two ways you can do this:

• You can download the files from your Dreamhack to your local machine, edit them, and then re-upload them.
• You can edit them directly on the Dreamhack itself.

If you want to edit them on the Dreamhack, you're going to need to learn one of the several Unix editors that are installed on the system. The question of which editor you should be using is going to be personal preference, and the "editor war" is a hotly-debated topic.

For an absolute beginner, the best editor to use is probably nano, an open-source version of the "pico" editor. it doesn't have everything, but it is very, very quickly learnable. (Other editors in the server include emacs, vim, and joe, but nano is the easiest. "pico" isn't installed on the server; if you try to use it, it'll run nano instead.)

Working with nano

One thing you absolutely do need to keep in mind, though, is that by default nano quietly adds linebreaks to the file that you're working on, not just word-wraps it for display in the editor. This can cause trouble with generating patches, and because it's indistinguishable from word-wrapping in the editor, it can take you a while to diagnose it. To prevent this from happening, when you call nano, do it with the -w flag, which will turn off auto-linebreaking:

nano -w filename

You may want to make this a default by editing the nano config file:

echo 'set nowrap' >> ~/.nanorc

Allow users to register without invite codes

A useful first edit is to turn invite codes off in etc/config.pl, to make it quicker to set up dummy accounts for playing around. Type:

cd $LJHOME
nano -w etc/config.pl

This will open the config file in nano. Have a skim through, as there are lots of useful options here. To turn invite codes off, scroll down to $USE_ACCT_CODES = 1 and change it to 0. To save this, use Ctrl-O and then Enter, and exit using Ctrl-X.

Once you've done that, restart your hack by typing "stop-apache", then "start-apache". (Every time you change a file that ends in .pm or .pl, it's a good idea to restart Apache again to make sure the modules reload.)

You can then go to http://www.yourname.hack.dreamwidth.net and start playing. The front page of your hack will still ask for an invite code -- that page is Dreamwidth specific, so it doesn't check whether invite codes are enabled or not -- but if you go to create.bml directly, you can create an account without a code.

Layout of the code directory

Your Dreamwidth code directory is set up with two separate copies of the code: one that actually runs the site (in ~/dw/*) and one that is in your 'cvs' directory (~/dw/cvs/dw-free or ~/dw/cvs/dw-nonfree), which is what you use to sync back and forth with the 'official' copy of the code. (Think of the whole thing like an endless series of comparisons: you're comparing the version you're working on with the version you have set aside, which you then compare against the master version that's stored on our code repository.)

Which version you edit is up to you. Everyone does it a bit differently. You can either edit in the live directory structure (~/dw/*) and then copy over to the cvs directory (~/dw/cvs/dw-free), or edit in the cvs directory and then copy over to the live directory. Either way, you're going to need to have your changes in both places: you need to have them in the live directory so you can test your change in your browser, and you need to have them in the cvs directory so you can generate a patchfile (which is a file that anyone else can apply against the code to make the same changes you're making).

( ... insert more background information on version control, patch files, diffs, copying over, and provide step-by-step list of what each workflow consists of, its benefits, and its drawbacks )

Finding what you're looking for in the code

The code is a little ... sprawling. Finding what you're looking to change can be pretty hard. Fortunately, we have some instructions at Dev Finding Things.

( ...insert more about where to look for things, common use areas, how to use rgrep for fun and profit, etc )

( ...insert more about how to recover from a disaster, aka What Happens When You Break It )

Submitting your changes to Dreamwidth

Making your changes into a patch

Once you've made your changes, and verified that they're working the way you want them to — testing every single usage case you think could possibly be affected by what you've changed — you need to submit your change to Bugzilla, so it can be applied to the official code repository. You don't send the whole file; you're going to generate what's known as a "patch" file, which highlights the bits that you've changed and only the bits that you've changed. One of the people (known as a 'committer') who maintain the official code repository will apply that patch to their own development environment, verify that it works, and if it works, commit it to the main code repository.

You don't have to manually write the patch file. There are tools that will create them for you. Again, everyone's workflow is slightly different, and there are a few different ways to generate patch files.

See Dev Patches and Dev Version Control for how to create a patch file, and Dev Committing Guidelines also has some useful information. You'll probably also need to read Dev Maintenance if you haven't already.

Uploading your patch to Bugzilla

Once you've got your patch file, you will upload it to Bugzilla. See Bugzilla workflow for the basics of how to get your patch file into Bugzilla and how you need to handle it.

• And that's it!